Tedee Keypad
€84.90
Use this numeric keypad to unlock your Tedee PRO or Tedee GO smart lock with just a PIN. No app or smartphone required!
Utilize it with up to 100 unique PINs, each featuring individual access permissions: permanent, temporary, or active on select days only. Easily share codes in your preferred manner and view each PIN’s access history in the Tedee app.
Allows for manual locking of your smart lock by pressing a button – with or without a PIN.
Powered by three AAA batteries. Installed with an adhesive pad or screws (included). Suitable for outdoor use. Position it up to 2m away from your Tedee GO, Tedee PRO, or Tedee Bridge for optimal performance.
Pair it with the Tedee Bridge and a compatible channel management platform to automate self-check-ins at your short-term rental.
9068 in stock
Unlock the door without a smartphone
Simply enter the PIN on the keypad door lock.
Setup in minutes
Power by three AAA batteries. Install with adhesive or screws - even outdoors.
Choose from five to eight digits
Set, change, and assign PIN codes via mobile app.
Manage up to 100 active PINs
Assign unique codes to their users for full access control and activity logs.
Share your way
No need for an app. You can simply text the PIN to your guest.
No risk necessary
No data are stored in the keypad. It only connects to the tedee smart lock that works through a secure cloud.
Smart keypad
Installation with adhesive tape
1. Remove the protective layer from the adhesive tape to get the sticky side ready.
2. Install tedee keypad by sticking it to the surface in the desired location (doorframe, wall, etc.).
Battery installation
1. Remove the screw mounting the rear cover using a Customized Torx key.
2. Remove the rear cover of tedee keypad.
3. Remove the insulation tape from the bottom of batteries.
4. Check the light signal and the buzzer.
5. Close the keypad by placing the rear cover back and fix the keypad housing with the screw using a Customized Torx key.
Installation with screws
1. Press the back cover of the keypad against the wall. Use a pencil to mark the places for the wall plugs. Drill two holes in the marked places.
2. Insert the wall plugs into the holes and place the back cover to the wall. Fix the back cover on the wall with the mounting screws from set using a Phillips screwdriver.
3. Hang the keypad on the back cover.
4. Fix the keypad housing with a screw using customized TORX key.
Battery installation
1. Remove the screw mounting the rear cover using a Customized Torx key.
2. Remove the rear cover of tedee keypad.
3. Remove the insulation tape from the bottom of batteries.
4. Check the light signal and the buzzer.
5. Close the keypad by placing the rear cover back and fix the keypad housing with the screw using a Customized Torx key.
