Keypad

Keypad

99.00£

Tax included
Free shipping

The keypad door lock provides PIN access. Create unique access codes of five to eight digits and open doors without using your smartphone.

9597 in stock

Quantity

Unlock the door without a smartphone

Simply enter the PIN on the keypad door lock.

Setup in minutes

Power by three AAA batteries. Install with adhesive or screws - even outdoors.

Choose from five to eight digits

Set, change, and assign PIN codes via mobile app.

Manage up to 100 active PINs

Assign unique codes to their users for full access control and activity logs.

Share your way

No need for an app. You can simply text the PIN to your guest.

No risk necessary

No data are stored in the keypad. It only connects to the tedee smart lock that works through a secure cloud.

Smart keypad

Installation with adhesive tape

1. Remove the protective layer from the adhesive tape to get the sticky side ready.

   

2. Install tedee keypad by sticking it to the surface in the desired location (doorframe, wall, etc.).

 

Battery installation

1. Remove the screw mounting the rear cover using a Customized Torx key.

2. Remove the rear cover of tedee keypad.

3. Remove the insulation tape from the bottom of batteries.

4. Check the light signal and the buzzer.

5. Close the keypad by placing the rear cover back and fix the keypad housing with the screw using a Customized Torx key.

Installation with screws

1. Press the back cover of the keypad against the wall. Use a pencil to mark the places for the wall plugs. Drill two holes in the marked places. 2. Insert the wall plugs into the holes and place the back cover to the wall. Fix the back cover on the wall with the mounting screws from set using a Phillips screwdriver.

   

3. Hang the keypad on the back cover.

4. Fix the keypad housing with a screw using customized TORX key.

   

Battery installation

1. Remove the screw mounting the rear cover using a Customized Torx key.

2. Remove the rear cover of tedee keypad.

3. Remove the insulation tape from the bottom of batteries.

4. Check the light signal and the buzzer.

5. Close the keypad by placing the rear cover back and fix the keypad housing with the screw using a Customized Torx key.

Model
TKV 1.0
Weight
120 g (without batteries), 155 g (with 3 AAA batteries)
Dimensions
48mm x 135mm x 28mm
Power supply
3 AAA batteries included
Battery life
as stated by the battery manufacturer
Bluetooth communication
Bluetooth BLE 5.0 2,4 Ghz
IP protection class
IP65
Keypad DOWNLOAD